It comes with a WP17 style torch that uses common consumables and has a 60 percent cycle at normal amps. The supplied 240V/120V adapter cord simplifies the process of switching between 120 volts and 240, with or without it just plugged the machine into your desired power source.
Outstanding features of the GiantTech ST200ACDC. This welder will operate on a standard 20 amp 110volt receptacle or off your common 50 amp 240 volt welder outlet. When connected off 240 volts you can weld up to 1/4 thick mild steel.High-frequency non contact arc ignition for highly controlled weld starts. Square-wave inverter for accurate aluminum welding. "WP-17"-type torch accepts common cups and collets with up to 1/8 electrodes. TIG Welding AC Duty Cycle (%): 120VAC 60% at 145 amps, 220VAC 60% at 190 ampsStick Welding Feature - welds in AC and DC Positive/Negative. A 200-amp GiantTech TIG welder is the most affordable way for mechanics and other metalworkers to get excellent welds on all of their projects. This AC/DC TIG welder uses a tungsten electrode to heat metals and joins them together without becoming part of the finished weld, reducing splatter and mess.
The AC mode is used for aluminum, while the DC mode can be used to weld steel and stainless steel in tube, sheet or bar stock form, offering incredible versatility in a skilled set of hands. A stick-weld feature is available as well for use in outdoor conditions or on dirty metals.
Our team has designed this machine to be easy for beginners to use while still offering the capabilities that advanced welders need. It has a straightforward control panel for setting your arc, amperage, and mode. The AC/DC mode control makes it easy to switch between modes. Our portable TIG welders weigh just 35 pounds so you can load them into a car, truck or trailer and bring them wherever you're needed.A Complete TIG Welding Package. Anyonewith a power source of 110 to 240 volts can power the GiantTech ST200ACDC Welder for spot welding or fabrication on metals thick and thin. You'll get precise welds thanks to the high-frequency instant start and square-wave AC inverter that assist with control and accuracy. It is rated for a duty cycle of 60 percent at normal amperage, meaning you can weld continuously for up to six minutes and complete a large section in one fell swoop. This welder comes ready to use right out of the box.
You only need supply the shielding gas/tank and AC power. We've included a variable foot pedal as well to set the amperage anywhere from 10 to 200 amps depending on project needs. Pre Gas Flow: 0.1-1.0 sec.
Remote Foot Pedal And Control: YesTorch:12 foot long, Standard WP-17Foot Pedal cable length:7 FeetTorch Control: Finger on/off control/Variable foot pedalOverall Dimensions:19.1 Long (486 mm) x 9.8 Wide (248 mm) x 20.0 in. Tall (508 mm)Approximate Weight: 45 lbs.
20.4kgDuty CycleDuty cycle is a welding equipment specification which defines the number of minutes, within a 10 minute period, during which a given welder can safely produce a particular welding current. For example, a 150 amp. Welder with a 30% duty cycle must be "rested" for at least 7 minutes after 3 minutes of continuous welding. (1) TIG 200 AC/DC Welder with NEMA6-50P Plug(1) Shielding Gas Regulator(1) Shielding Gas Hose(1) Ground Cable with Clamp (10")(1) TIG Torch (17 Series) which accepts industry-standard cups, collets and collet bodies (14")(1) Foot Pedal for Amperage Control(1) 110-120 VAC to 220-240 VAC Adapter Plug(1) Instruction Manual(1) #7 Gas Nozzle (7/16)(1) #6 Gas Nozzle (3/8)(1) #5 Gas Nozzle (5/16) (Installed)(1) Long Back Cap(1) Short Back Cap (Installed)(1) 3/32 Collet Body (Installed)(1) 3/32 Collet (Installed)(1) 2mm Collet(1) 1/16 Collet(1) 3/32 Red Thoriated Tungsten(1) 3/32 Green Pure Tungsten.Product descriptionThe GIANTTECH ST200AC/DC welder is an inverter based tig welding machine that utilizes the most advanced inverter technology. IGBT circuits along with PWM technology, along with the greatly reduced size and weight, enable this welder to not only be more efficient by 30%, but also as a result of the electronic circuitry, enables this acdc tig welding machine to afford the user far more and better range of settings for each specific weld. The GIANTTECH ST200AC/DC also has a 40% duty cycle at full amperage for DC TIG and a 60% duty cycle for AC TIG. The GIANTTECH ST200AC/DC is capable of welding with either AC or DC current. This allows the user to choose DC current welding for carbon steel, stainless steel, copper and many other metals, while also being equipped with the ability to switch over to AC welding used in welding aluminum and aluminum alloys. In addition to its advanced TIG welding functions, the GIANTTECH ST200AC/DC is also a very good MMA / Stick welder. This AC/DC TIG welder adopts our companys exclusive High Frequency technology as well as a pure square wave output, excellent arc force and a wide range of balance control for aluminum cleaning. This AC/DC TIG welder also offers a feature not always found in this price range. For example, 2T-4T touch control, start amps, end amps, upslope, downslope, pulse, AC Balance. The item "TIG WELDER 200 Amp AC DC Foot Pedal & Argon Regulator Incld True Digital Control" is in sale since Sunday, October 25, 2020.
This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders". The seller is "epicweld" and is located in Wentworth, New Hampshire.
This item can be shipped to United States.